Tp Chassis Digiturk Enabled Tv Setup; Television Setup - Grundig 22VLE4300 BA Service Manual

Tp chassis / television
Table of Contents

Advertisement

17. TP CHASSIS DIGITURK ENABLED TV SETUP

Our TP-chassis digital broadcasting enabled televisions are launched together with
Digiturk membership package according to the agreement entered with Digiturk. In
our TVs, Digiturk mode will run over Eutelsat 7.0° satellite.
NOTE: Please refer to TP-Training Manual for detailed technical specifications of our
TP televisions and contact the dealers for the circular containing details of TP-
Digiturk campaign.
In addition to standard accessories of a TV, these products also come with the
accessories that enable reception of Digiturk satellite broadcasting.
1. CA module (CAM)
2. Smart Card
3. Digiturk Password Envelope (JLS813 DIGITURK PASSWORD ENVELOPE)
4. Digiturk Agreement (JLK813 DIGITURK AGREEMENT)
NOTE: The module and card that comes with the product are the property of the
customer, they cannot be reclaimed after Digiturk membership expires.

17.1.Television setup

Once TV's mains and (satellite) antenna connection is completed, Installation Guide
appears on the screen when the TV is turned on for the first time. In the first screen,
"Turkish" is selected for language. And after selecting "Home Mode" in the second
screen and "Turkey" in the third screen, you should select "satellite" for "Connection
Type" via joystick in the fourth screen.
As this is Digiturk setup, "Digiturk Mode" is selected in the 5
If diseq switch (it is required in the systems with more than one satellite) is not used
in the system and Eutelsat 7° satellite (standard D igiturk dish direction) oriented dish
antenna is connected, "easy installation" will be selected in 6
th
the 7
screen, when you press "Start" (green line), the channels will be automatically
searched and listed.
If diseq switch is used in the system, "Advanced Installation" will be selected to enter
"Antenna Settings" and Diseq selection related to Eutelsat will be determined.
Note: MDU selection is not required, MDUs are automatically scanned.
When the setup of channels is completed, the card will be installed in CA module and
the module will be inserted into the related module input of TV.
113
(JLS120R DIGITURK IRDETO CI+ CA MODULE)
(JLS180R DIGITURK IRDETO CI+ CA CARD)
September 2011
TP CHASSIS / TELEVISION
th
screen.
th
screen to continue. In

Advertisement

Table of Contents
loading

Table of Contents