Table of Contents
Advertisement
5. USING NEW PRODUCT FEATURES
5.1. Digital Satellite Settings and Setup (DVB-S2)
There are two ways of setting the digital satellite channels: The first simple setup and
the other is advanced setup.
5.1.1. Easy Installation
All antenna settings are preconfigured for Turksat 42° East satellite stations.
1.In Source Setup menu, Connection Type tab, select Satellite with
2.Use
to select Easy Installation and press OK.
3. Press ● (Green) button to start searching. Search Results menu appears and the
search for TV stations begins. Search may take several minutes depending on the
number of television stations received. The search ends when the PROGRAMME
TABLE appears.
5.1.2. Advanced Installation
if you want to receive the stations from a
different satellite, you must configure the
antenna
settings
DISEqC Mode, LNB selection) for the
desired satellite.
1. In Source Setup menu, Connection type
tab, select Satellite with
2. Select Advanced Installation with
and press OK. ANTENNA SETTINGS menu
will be displayed.
3. Select Auto Tuning with
OK. Select the satellite with
, and press OK. The value in
Transponder tab is not required for auto
tuning.
4. Select LNB Power tab with
13/18V or 14/19V with
5. Select LNB Type with
satellite system with
cancel it.
6. Select DISEqC Mode with
systems, select DISEqC 1.0 or DISEqC 1.1 with
22
(satellite,
LNB
Type,
.
and press
and
. Depending on the LNB type, set LNB power to
.
and press OK. Select the LNB type used in the
. Press ● (Green) to store the selection or ● (Red) to
. Based on the number of current satellite
September 2011
TP CHASSIS / TELEVISION
.
DISEqC 1.0 allows for
.
Advertisement
Table of Contents
