Table of Contents
Advertisement
Step 2:
Given in the software package Target folder is copied into the USB memory.
Step 3:
Insert the USB memory to the USB port that is located side of the TV.
Step 4:
After MStar ISP tool connects to the TV, a terminal control program, such as minicom or
hyperterminal, is executed.
Settings:
Baud: 115200
Databits: 8
Stopbits: 1
Parity: None
FlowControl: None
Step 5:
TV power off changed to power on. Within 1 second, immediately with pressing PC's "ENTER"
key, TV's drop to the console is provided.
Step 6:
In the console;
<< MStar >># usb start 1
is entered.
Advertisement
Table of Contents
