Table of Contents
Advertisement
TP CHASSIS / TELEVISION
Cloner Menu will be displayed by using password "4,6,5,8" on "Menu/Source
Setup/Program Table". With such authorization, we can perform channel tuning
(Source Setup menu), maximum initial sound volume settings and whether TV will
stay on Stand-By or directly switch on when plugged in (Hotel TV Settings menu).
This feature turns off after TV is switched to Stand-By.
The channels are tuned and favourite list is determined over source settings. In
customer mode, TV is turned on at the channel and source where it was turned off at
admin mode. This feature should be used to set TV's opening channel. As an
opening channel, you may set the hotel's own advertisement channel with hotel's
videos or a channel advertising paid broadcasts. In customer mode, it is not an error
that TV is turned on at the same source and channel whichever channel or source
was open when turning off the TV. You should consider this issue before switching
TV to Stand-By in Admin mode.
When setting up hotel TV, the easiest and most convenient way is to perform all
settings on a single TV and copy the same configuration to other TVs by means of
cloning feature. Here, you should make sure that TV is turned off at the intended
channel after completing setup at the admin mode.
112
September 2011
Advertisement
Table of Contents
