Table of Contents
Advertisement
РАСЕ
25
WEIDER
SPORTING
60005
ing the WEIGHT STACK CABLE (40)
down and select а 3" LONG "1." SHAPED
"CABLE TRAP BRACKET (36) and a 3
12" PULLEY (J) (34). Fit the Pulley over
"ће: Cable
and
align the
Cable
Trap
. Bracket to the Pulley so the Bracket holds
: thé Cable into the Pulley. With a 3/8" X 1.
> 3/4" HEX HEAD BOLT (65), Бой through
` the Cable Trap and Pulley апа into the
.BASE PULLEY
BRACKET
(7) on the
‚ fight side of the BASE FRAME (1) just to
. the front of the Weight stack.
Align the
. Cable Trap Bracket at about four o'clock
"апа fasten with а 3/8" NYLON
LOCK
: NUT (63).
C] sPECIlAL
NOTE:
| The
above
pre-assembly of the 3 1/2" PULLEY (J)
(34), the CABLE TRAP BRACKET (36)
has been assembled only finger tight so
that the WEIGHT STACK CABLE (40)
: may:be asserriblad.
into bs. Pulley:nt—: - |
this time. Assemble the Cable into the
Pulley and tighten this assembly.
И
Advertisement
Table of Contents
