Maintenance Of Main Brush (Weekly Cleaning Is Recommended); Cleaning Of Side Brush (Weekly Cleaning Is Recommended) - Eureka NER J12 Ultra Instruction Manual

MAINTENANCE
How to use the cleaning brush:
1. Cut the hair entangled on the main brush body with the blade.
2. Brush o the cut hair with the brush.
Brush
Maintenance of Main Brush (Weekly cleaning is
recommended)
01
Press and hold the left
and right release buttons
on the cover plate of the
main brush and lift out
the cover plate.
Blade
02
Lift the red side of the
main brush to take it
out.
03
Cut any hairs wrapped
around the main brush
by using the cleaning
brush in the accessories
box. Then, clean the main
brush and its cover plate
by using the cleaning
brush or a soft cloth.

Cleaning of Side Brush (Weekly cleaning is recommended)

Pull out the side brush. Remove dust on the side brush.
22
04
Wash the main brush
with water and dry it.
After cleaning, install
the main brush and
then the cover plate
into the robot vacuum.