Setting Up App - Eureka NER J12 Ultra Instruction Manual

PREPARATIONS BEFORE USE

Setting Up App

NOTES
1. The app supports iOS versions 13.0 and above and Android
versions 8.0 and above. The app is not available for use with
tablets.
2. This model does not support a WEP encrypted router.
3. The home wireless network name and password must contain
only letters, numbers and standard symbols.
4. The network accessing configuration of the robot requires a
wireless network of 2.4GHz frequency range.
5. The robot must be connected to wireless network to enable
controlling the robot using the app. Once you have set up the
app and connected the robot to wireless network, the app
can be used to control the robot in wireless
network /2G/3G/4G/5G network environment.
6. If your home wireless network password is changed or the
router is replaced, the robot will show as o ine in the app;
you will need to reconnect the robot to wireless network
following the wireless network connection instructions.
Download the App
Scan the following QR code or search for eureka robot to
download the App. Follow the instructions in the app to create
a new account or login.
Add Device
Click "+" or "Add Device" in the App to add the device. Choose
NER J12 Ultra.
Follow the instructions on the app and continue until the app
prompts that the connection is successful.
Connect the Device
1. Connect your robot to the network that you plan to use for
operating the robot. Make sure the robot is placed within
good wireless network coverage.
2. After assembling and powering on the robot, open the robot
cover. Press and hold the wireless network pairing button
for 3 seconds until you hear a beep. The network indicator
light should start flashing. Follow instructions in app for next
steps.
16