Mop Drying; Status Indicators Of Robot Vacuum; Self-Cleaning Base Buttons - Eureka NER J12 Ultra Instruction Manual

19
GETTING STARTED

Mop Drying

After the robot finishes mop washing, it will automatically
initiate mop drying process (hot air drying, by default). You can
modify the functions in the app.
NOTES
1. Do not remove the robot vacuum from the self-cleaning base
when it is washing the mopping cloth. Doing so may damage
the water refilling pipe.
2. Do not move the self-cleaning base after the robot vacuum
starts cleaning.

Status Indicators of Robot Vacuum

Indicator Light Status
Steady-on Standby/Sweeping
white light /Docking
Flashing white
Charging
light
Flashing red
An error occurs
light
Steady-on
Docking
white light
Steady-on red Low battery and
light docking
Steady-on Zone cleaning--
white light vacuuming
Steady-on Zone cleaning--
blue light mopping

Self-Cleaning Base Buttons

Operation
Briefly Press
Press and
hold
Actions
/
/
Refer to
"Common
Problems"
/
/
/
/
Button
Recall the robot
vacuum to the
base/Enable the robot
Start/resume/pause
vacuum to exit the
base
Stop a cleaning task /