Installation Of The Mopping Cloth; Power On & Charging - Eureka NER J12 Ultra Instruction Manual

PREPARATIONS BEFORE USE

Installation of the Mopping Cloth

01
As shown in the figure, align the mopping cloth centrally
with the mopping holder and apply it evenly.
02
Press the mopping module into the robot to complete
the installation.
Power on & Charging
Press and hold " " button to power on the robotvacuum.
After the power indicator turns on, put the robot vacuum into
the self-cleaning base for charging, as shown in the figure. To
ensure that the robot vacuum is always ready for use, keep it in
the charging state.
NOTES
1. If you manually put the robot vacuum into the base, ensure
that the side with the charging contacts is placed inside.
2. Ensure that the robot vacuum is fully charged before first use.
3. After the robot vacuum is manually put into the base, the
robot vacuum will automatically power on and pair with the
base.
4. If the " " indicator light shows steady-on white light, it
means the robot is successfully connected to the
self-cleaning base. If the light flashes quickly, see
"Common Problems".
14