How To Operate Your Vacuum Cleaner For Cleaning - Eureka NEW400 Series Owner's Manual

How to Operate Your Vacuum Cleaner for Cleaning

Recline machine by stepping on the floor
nozzle and pulling back on handle.
Dirty water detection alarm
When the dirty water reaches the MAX line and the
float floats up to block the suction port, and ON/OFF
button LED flashes purple. Please empty and clean
the dirty water tank before resuming use.
8
Eureka Customer Service HELPLINE 1-800-282-2886
CAUTION
!
ON/OFF key
Turn the machine ON or OFF by
pressing the ON/OFF button
briefly; (There will be a 3s delay
when the machine is switched
off.
Float
Upright and Pause
This machine is equipped with upright detect function,
when the machine is placed upright, it will stop
running and enter into standby mode.
The machine will shut down automatically after 3mins
if on operation during stadby mode.
Mode key
Machine begins in standard mode
by default; press on the Mode
button to switch between modes.