Modulation Delay (Preset Bank) - Yamaha SPX2000 Owner's Manual

Effect list
The following tables show the default parameter values for the effect belonging to the Stereo Delay type (PRESET bank).
■Basic parameters
No. Effect name
49 STEREO DELAY
■Fine parameters
No.
Effect name
49 STEREO DELAY

Modulation Delay (PRESET bank)

IN
HPF LPF
These effects modulate the delay sound.
Each aspect of the sound is controlled by the following effect parameters.
DELAY, FB.GAIN, HI.RATIO
Delay sound:
FREQ., DEPTH, WAVE
Modulation signal:
SYNC, DLY.NOTE, MOD.NOTE, TEMPO
Tempo synchronization:
HPF, LPF
Filter/equalizer:
OUT LVL, MIX BAL.
Output level:
Parameter details
■Basic parameters
Parameter name Range
DELAY 0.0—2725.0 ms
FB.GAIN –99%—+99%
HI.RATIO 0.1—1.0
FREQ. 0.05—40.00 Hz
DEPTH 0—100%
WAVE Sine, Tri
DELAY L DELAY R FB.G L
250.0 ms 375.0 ms +44%
MIX BAL. OUT LVL HPF
100% 90% Thru
DELAY
with
Modulation
FB.GAIN
Delay relative to the original sound.
Amount of feedback for the delay sound. This indicates the ratio by which the level is reduced
when repeating the effect. For example with a setting of +50, the level of the delay sound will decay
to 50% → 25% → 12.5% as it is repeated. Negative (–) values invert the phase of the feedback.
Amount of feedback for the high-frequency portion of the delay sound. This is specified as a pro-
portion of FB.GAIN. If this value is 0.1, the feedback amount will be 1/10th of FB.GAIN; if this
value is 1.0, the feedback amount will be the same as FB.GAIN.
Speed of modulation. Increasing this value will cause the delay sound to be modulated in a shorter
cycle.
Depth of modulation. Increasing this value will make the modulation deeper.
Waveform of the modulation signal. This will affect the character of the modulation.
You can choose Sine (sine wave) or Tri (triangle wave).
FB.G R HI.RATIO
+28% 0.6
LPF SYNC NOTE L
12.5 kHz OFF
OUT L
MIX
BAL.
OUT R
Explanation
SPX2000—Owner's Manual
NOTE R TEMPO
—
41