Listening To Voice Mail Messages - Panasonic KX- TC1721B Operating Instructions Manual

Listening to Voice Mail Messages
After receiving a voice mail message, the VOICE MAIL indicator will flash.
To listen to your voice mail, follow the steps below.
1
2
Press (CALL WAST/VOICE MAIL).
e The display shows whether there are voice
mail messages recorded for LINE 1, and
LINE 1's access number.
a) To listen to voice mail messages for
LINE 1, go to step 3.
b) To check voice mail messages for
LINE 2, press
again.
e The display shows whether there are
voice mail messages recorded for
LINE 2, and LINE 2's access number.
e Each time you press
CALL WAIT/VOICE MAIL|, the line will
change.
e To return to the stand-by mode, press
(EXIT).
Press (TALK).
e The unit is connected to the telephone line
and automatically dials the access number.
e You can also press a line button instead of
(TALK).
4 Follow the pre-recorded instructions.
5 When finished, press (TALK).
Ex. LINE 1 has voice
mail message(s).
Voicemail:Yes
123456789
Linel
Ex. LINE 2 has no voice
mail messages.
Voicemail :None
112223333
Line2
Talk
12345678390
CH10
VO PE HY
o The line which calls your voice mail service depends on the "Line Selection" (p. 45).
e If the VOICE MAIL indicator still flashes even after you have listened to your
voice mail messages, press and release (PROGRAM), then press and hold
until the unit beeps. The indicator will turn off.
e If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, the VOICE MAIL indicator may not flash.
e If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone on the same line. If you use another phone to retrieve
messages, you have to dial your access number manually.
39