Listening To Voice Mail Messages; Special Features; Automatic Security Code Setting; Handset Locator - Panasonic KX-TG2551CS Operating Instructions Manual

Voice Mail Service

Listening to Voice Mail Messages

After receiving a voice mail message, "Voicemail" will be displayed.
To listen to your voice mail message(s), follow the steps below:
1 Press
(FLASH/CALL!WAIT/VOICE!MAIL)
•The unit is connected to the telephone line and dials the access number (p. 42).
Follow the pre-recorded instructions.
2
When finished, press
3
•If "Voicemail" still remains on the display even if you have listened to your
voice mail message(s), press (FUNCTION/EXIT/CH), and press and hold
(CLEAR) until the unit beeps. "Voicemail" will disappear.
•If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, "Voicemail" may not be displayed.
•If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.

Special Features

Automatic Security Code Setting

Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.

Handset Locator

You can locate the handset or page the handset user with beep tones
from the base unit.
Press
1
(HANDSET!LOCATOR)
•The IN USE/CHARGE indicator flashes. The handset beeps for 1 minute
and "Paging" is displayed.
To stop paging, press
2
twice on the handset.
44
.
(TALK)
.
(HANDSET!LOCATOR)
, and press
(TALK)
again or press
.
(TALK)