Erasing Caller List Information
After checking the Caller List, you can erase some or all of the entries.
The TALK indicator light must be off.
To erase a specific caller from the Caller List
|
Lift the handset off the base unit.
OR
10 new
calls
If the handset is off the base unit, press
v=New
A=Ol1d
SEARCH V or (A) to enter the list.
2 Press SEARCH (Y or (A) repeatedly to find
[rom REAGAN
the caller you want to erase from the Caller
444-5555
List.
12:20A
JAN12
V
3
Press
(CLEAR).
o A beep sounds and the information is erased.
e After a few seconds, the display will show the
previous caller information.
ə To return to the stand-by mode, press
or
wait for 60 seconds.
Clear
To erase all entries in the Caller List
| Lift the handset off the base unit.
Make sure this display is
OR
shown.
If the handset is off the base unit, press
SEARCH [V or {N to enter the list.
0 new call
V=New
A=01d
all
clear
3 Press (CLEAR) again.
e A beep sounds and all entries are erased.
e The handset will return to the stand-by mode.
All
clear
35