Table of Contents
Advertisement
Problem
REDIAL/PAUSE]
does not
function properly.
You cannot redial by
pressing
[REDIAL/PAUSE].
"Recharge" is displayed,
"{
EP flashes or the unit
beeps intermittently.
You charged the battery
fully, but "Recharge' is still
displayed and/or "{
EJ"
continues to flash.
The IN USE/CHARGE
indicator light does not go
out while charging.
If you cannot solve your
problem
Remedy
"se The button has a double function as
either redial or pause. It will redial the
last number dialed if pressed at the
outset of a call (p. 23}. If another number
has been dialed first, it will operate as a
pause button (p. 44).
e Access numbers entered after pressing
will not be included when
redialing (p. 43).
e If the last number dialed was more than
32 digits long, the number will not be
redialed.
E Charge the battery fully (p. 14).
e Clean the charge contacts and charge
again (p. 15).
e Install a new battery (p. 47}.
e This is normal.
e Call our customer call center at
1-800-21 1-PANA(7262).
` - e Panasonic's e-mail address for customer
inquiries:
consumerproducts
@ panasonic.com
for customers in the USA or Puerto Rico
ONLY
BUO
at
Advertisement
Table of Contents
