Presetting Stations; Preset Number Tuning - Aiwa XR-M7 Operating Instructions Manual

.
or
ui
eomea
mae a
Ee
ae
24
RADIO RECEPTION
PRESETTING STATIONS — 3
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1 Press the TUNER/BAND button to select a band,
and press the <4 DOWN or UP > button to
select a station,
2 Press the Il SET bution to store the station.
A preset number is assigned to the station, beginning from 1
in consecutive order for each band.
DISPLAY
@ The frequency
@ The preset number
@ The preset numbers
The selected preset number flashes.
Note that only the first 20 numbers are displayed, even if
stations 21 to 32 have been stored,
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored for all the bands.
PRESET NUMBER TUNING - a
Use the remote control to select the preset number directly.
7 Press the TUNER BAND button to select a band,
2 Press the numeric buttons to select a preset
number.
Example:
To select preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the <4 DIRECTION/PRESET button repeatedly.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then,
press the li CLEAR button, and press the H SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are aiso decreased by one.