Aiwa XR-M7 Operating Instructions Manual page 8

REPARATIONS
CONNECTIONS
See the illustrations below which correspond to steps 1 to 4 to
complete connections.
74 Connect the right speaker to the main unit.
Cal ting the speaker cord to the right speaker
Push the levers of each terminal, and insert the conductor of
the cord with the white stripe to the © terminal and the other
cord to the © terminal. Then release the levers to lock.
Connecting the speaker cord to the unit
Open the levers of the SPEAKERS R terminals and insert.
the conductors of the cord with the white stripe to the ®
terminal and the other cord to the © terminal. Then shut the
fevers to lock.
2 Connect the left speaker to the main unit.
Connect the other speaker cord to the Jeft speaker and the
SPEAKERS L terminal on the main unit in the same manner
as step 1.
3 Connect the supplied antennas (FM antenna @
and AM (MW/LW) antenna @).
4 Connect the AC cord to an AC outlet.
* Donotleave objects generating magnetism near the speakers,
* Do not bring the FM antenna near metal objects or curtain rails.
* Do not bring the AM (MW/LW) loop antenna near other optional
equipment, the stereo system itself, the AC cord or speaker
cords, since noise will be picked up.
* Do not unwind the AM (MW/LW) loop antenna wire.
CONNECTING AN OUTDOOR ANTENNA > FI
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to the FM 75 © terminal(s).
L See page 46 on connection of other optional equipment.
a e
os
ae a cee penance r e s s
8