Health O Meter 522KL Manual page 45

ASSEMBLY INSTRUCTIONS (CONTINUED)
522KL/522KG NEXT STEPS
6. Locate the 2 M6 x 16mm screws
included in the clear plastic bag. Align
the 2 holes in the tray with the
mounting holes on the scale platform.
Insert the screws and tighten to attach
the tray to the scale platform.
7. Obtain the circular adhesive screw
covers and place onto the screw cap
on the tray.
8. Obtain the measuring tape and remove
the adhesive backing. Affix the
measuring tape to the bottom or side of
tray.
524KL/524KG NEXT STEPS
9. Locate the two black seat mounting
brackets in the carton. Unscrew and
remove the black knobs on the
mounting brackets. Note: The
brackets are marked as bracket C and
bracket D. The tabs on bracket C are
shorter than bracket D.
10. Obtain the four M6 x 16mm screws
included in the clear plastic bag. Align
the holes in the tabs of the mounting
brackets with the holes in the
platform. Insert the screws through
the brackets and into the platform.
Using a Phillips head screwdriver,
tighten the screws to secure both
brackets to the platform.
IMPORTANT: Ensure that bracket C
is mounted on the edge of the
platform, not the side of the platform
next to the scale pillar.
11. Place the seat onto mounting brackets
by aligning the notches on the seat
with the pegs on the mounting
brackets.
12. Locate the black knobs previously
removed in step 6. Insert the knobs
through the holes in the side of the
seat and into the mounting brackets.
Turn clockwise to completely tighten
the knobs and secure the seat onto
the mounting brackets. Scale
assembly is now complete.
P/N UM522KL 522KG 524KL 524KG Rev20190412
45
Bracket C