Health O Meter 522KL Manual page 11

SET UP INSTRUCTIONS (CONTINUED)
Setting Sound Options
The display can be set to stay silent or beep while operating the scale. The default setting
for Sound is "enabled". Follow this procedure to enable or disable sound.
1. While the scale is turned off, press and hold the UNIT button then press and release the
button. Hold the UNIT button until "AOF=d" or "AOF=E" appears on the display, then
release. Use the ZERO/TARE to advance or the
screen until "Snd" appears. Press the UNIT button to change the setting.
Snd = E Enables sound so the scale beeps when keys are pressed.
Snd = d Disables sound so the scale stays silent when keys are pressed.
2. Choose the setting you prefer and press HOLD/RELEASE to save your selection and
exit the options mode.
3. The scale will restart. The display will show "UEr", followed by a version number, and
then dashes. When the display shows "0.0" the scale is ready to use.
Locking Unit of Measure (LB or KG) (KL versions only)
The weight measuring unit (pounds / LB or kilograms / KG) can be locked to display weight
only in the selected unit of measure. The unit of measure lock default setting is "unlocked".
Follow this procedure to lock the UNIT button. Note: If Everlock
not appear in the Options mode.
1. While the scale is turned off, press and hold the UNIT button then press and release the
button. Hold the UNIT button until "AOF=d" or "AOF=E" appears on the display, then
release. Use the ZERO/TARE to advance or the
screen until "Unt" appears. Press the UNIT button to change the setting.
Unt = U Allows the user to toggle weight measurement between LB and KG.
Unt = L Locks the unit button so weight is only displayed in pounds (LB)
Unt = ├
Locks the unit button so weight is only displayed in kilograms (KG)
2. Choose the setting you prefer and press HOLD/RELEASE to save your selection and
exit the options mode.
3. The scale will restart. The display will show "UEr", followed by a version number, and
then dashes. When the display shows "0.0" the scale is ready to use.
Enabling Unit View with Unit of Measure Locked
If the scale is locked per the instructions above, users can still view the alternate weight
measuring unit by enabling the "Unit View" option. Enabling the "Unit View" option allows the
user to press the UNIT button to briefly display the weight in the alternate weight measuring
unit. After releasing the UNIT button the display will return to the locked weight measuring
unit. The "Unit View" default setting is "Disable". Follow this procedure to enable "Unit View"
when the weight measuring unit is locked. Note: If Everlock
appear in the Options mode.
1. While the scale is turned off, press and hold the UNIT button then press and release the
button. Hold the UNIT button until "AOF=d" or "AOF=E" appears on the display, then
release. Use the ZERO/TARE button to advance or the
display screen until "UdP" appears. Press the UNIT button to change the setting.
UdP = d Disables the UNIT button so it will not display the other weight measuring
unit.
UdP = E Allows the user to view the other weight measuring unit by holding down the
UNIT button even if the weight measuring unit is locked. Enabling this
function will only allow the user to view the other unit while pressing the UNIT
button; it will not unlock the weight measuring unit.
2. Choose the setting you prefer and press HOLD/RELEASE to save your selection and
exit the Options mode.
3. The scale will restart. The display will show "UEr", followed by a version number, and
then dashes. When the display shows "0.0" the scale is ready to use.
P/N UM522KL 522KG 524KL 524KG Rev20230223
button to scroll back the display
®
is engaged, this feature will
button to scroll back the display
®
is enabled, this feature will not
button to scroll back the
11
Back to Home Page