Health O Meter 522KL Manual page 12

SET UP INSTRUCTIONS (CONTINUED)
®
Everlock (KL versions only)
®
The Everlock feature allows the measuring unit to be permanently locked on the scale, disabling
the UNIT button. The Everlock
®
Everlock .
Warning: This lock is permanent and cannot be reversed.
Notes:
• Press HOLD/RELEASE at any time to exit the Everlock
• Once Everlock
®
is engaged the Unt and UdP options will no longer be displayed when
scrolling through the Options menu.
• There is no method to undo Everlock
1. While the scale is turned off, press and hold the UNIT button then press and release the
button. Hold the UNIT button until "AOF=d" or "AOF=E" appears on the display, then
release. Use the ZERO/TARE to advance or the
until "ELC" appears. Press the UNIT button to change the setting.
ELC =d Default setting with Everlock
ELC = E Engages Everlock
begin the locking procedure. If this is desired, follow the instructions below.
is selected, "PASS1" will appear on the display. This prompts the user to
®
2. After Everlock
enter a password. Press the following keys in this sequence:
, , ZERO/TARE, UNIT
3. If entered correctly, "ELC=L" (if scale was in LB mode) or "ELC=6" (if scale was in KG mode)
will appear on the display.
4. Use the UNIT to toggle between (L) Pounds and (6) Kilograms. When the desired unit is
displayed, press HOLD/RELEASE and "PASS2" will appear on the display.
5. This will prompt the user to enter the second password. Press the following keys in this
sequence:
ZERO/TARE, UNIT,
6. If entered correctly, the scale will display "ELC = L" or "ELC = 6," depending on the unit of
measurement that was selected. Everlock
P/N UM522KL 522KG 524KL 524KG Rev20230223
default setting is "disabled". Follow this procedure to engage
®
®
without sending the scale back to the manufacturer.
®
disabled.
®
. Once this option is selected, the display will prompt you to
®
is now engaged.
12
®
procedure.
button to scroll back the display screen
Back to Home Page