Table of Contents
Advertisement
Operation
Operation
Dispense Menus
Manual Dispense
D
E
F
G
F
. 33
IG
D
ACTIVATE - activates the trigger for dis-
pensing.
E
Volume of fluid dispensed - displays the
quantity of fluid dispensing.
F
Unit of measure, US or Metric - set using
Pulse Fluid Management Software.
G
END - stops the dispense in the Pulse sys-
tem.
To dispense fluid in Manual Dispense mode:
1.
Wake up metered dispense valve by
pressing any button on the metered
dispense valve key pad (F
2.
Press ENTER to select ACTIVATE (D).
3.
Pull the trigger to dispense fluid. (The
display (E) shows the amount
dispensed.)
4.
When the desired amount has been
dispensed, release the trigger to stop
the fluid flow.
5.
END (G) is highlighted on the screen.
Press ENTER to select END.
20
Preset Dispense
F
D
E
F
G
H
. 1, page 7).
IG
J
K
L
M
H
D
E
F
J
K
G
. 34
IG
ACTIVATE - activates the trigger for dis-
pensing.
Volume of fluid dispensed - displays the
quantity of fluid dispensing.
Unit of measure, US or Metric - set using
Pulse Fluid Management Software.
END - stops the dispense in the Pulse sys-
tem.
PRESET - navigates to the preset selection
menu for selecting predefined values.
STOP - stops the preset dispense before
reaching the preset amount and deactivates
the trigger.
Progress Bar - displays an estimate of
progress through the dispense task.
Includes the complete value.
Total Preset Amount - amount of fluid
dispensed when the preset is complete.
TOPOFF - Allows for dispensing additional
fluid after the preset amount is reached.
L
M
3A7397E
Advertisement
Table of Contents
