Deleting Times From A Week Program - A.O. Smith cyclone BFC - 80 Installation And Service Manual

11
The display shows the menu for the week
program. The cursor points to the active period.
DAY TIME Tset
ON »SU 08:15 75ÉC P
OFF SU 12:45
ON MO 00:00 65ÉC P
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
2. Scroll to INSERT.
Confirm with .
The sub-menu for adding a period will appear.
ON »SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP ON SAVE
Example
As an example, we will program an extra period in
which the switch-on time is set to 18:00 hours, and the
corresponding switch-off time to 22:00 hours. The
water temperature will be set to 75 °C and the pump
will run continuously.
DAY TIME Tset
ON »SU 18:00 75ÉC P
OFF SU 22:00
ON MO 00:00 65ÉC P
OFF MO 23:59
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
3. Proceed as follows:
a. Set the switch-on time
setting the switch-on
b. Set the switch-off time
setting the switch-off
c. Set the water temperature
program: setting the water
d. Set the program-controlled
pump (11.6.4 "Week program: setting the
program-controlled
5. To activate the week program with the new period
added, scroll down with
START OPERATION and confirm with
60
Main menu
(11.6.1 "Week program:
time").
(11.6.2 "Week program:
time").
(11.6.3 "Week
temperature").
pump").
to
.

11.8 Deleting times from a week program

All switch-on/off times are shown sequentially in the
display. Assume that the switch-on/off times for the
appliance are programmed as in the figure.
DAY TIME Tset
ON »SU 08:15 75ÉC P
OFF SU 12:45
ON SU 18:00 75ÉC P
OFF SU 22:00
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
To delete a period, proceed as follows:
1. : WEEK PROGRAM | PROGRAM OVERVIEW.
Confirm with .
MENU
OFF
^»ON
È WEEK PROGRAM
2. Scroll with to PROGRAM OVERVIEW.
Confirm with .
WEEK PROGRAM
START OPERATION
^»PROGRAM OVERVIEW
È
The display shows the menu for the week
program.
3. Scroll with to DELETE.
Confirm with .
To warn you that you are now working in the delete
sub-menu, the cursor is replaced with an
exclamation mark (!) and the period settings flash.
DAY TIME Tset
ON !SU 08:15 75ÉC P
OFF SU 12:45
ON SU 18:00 75ÉC P
OFF SU 22:00
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
4. Scroll with to the day to be deleted. For
example, SU (Sunday) in the second period. See
the figure.
gis
Instruction manual BFC