Adding Times To A Week Program - A.O. Smith cyclone BFC - 80 Installation And Service Manual

gis
Confirm with .
The cursor moves to the minute digits, which flash.
ON SU 08»00
OFF SU 08:00
Tset 65ÉC
PUMP ON SAVE
Note
Because the switch-off time can never be earlier
than the switch-on time, the switch-off time setting is
automatically adjusted with the switch-on time.
4. Use and to set the minutes. In the example,
this is 15.
Confirm with .
The cursor moves to the switch-off hour digits,
which flash.
ON SU 08:15
OFF SU»08:15
Tset 65ÉC
PUMP ON SAVE
11.6.2 Week program: setting the switch-
off time
1. Use and to set the hours. In the example, this
is 12.
Confirm with .
The cursor moves to the minute digits, which flash.
ON SU 08:15
OFF SU 12»15
Tset 65ÉC
PUMP ON SAVE
2. Use and to set the minutes. In the example,
this is 45.
Confirm with .
The cursor moves to the desired water
temperature.
ON SU 08:15
OFF SU 12:45
Tset»65ÉC
PUMP ON SAVE
11.6.3 Week program: setting the water
temperature
1. Use and to set the water temperature. In the
example this is 75°C.
Confirm with .
The cursor moves to PUMP ON
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP»ON SAVE
Instruction manual BFC
11.6.4 Week program: setting the program-
controlled pump
1. If required, a pump can be controlled during the
period. Use and to set PUMP ON . The pump
ensures a regular circulation of hot water in the hot
water pipes. You can skip this step if you there is
no pump in your hot water circuit.
Confirm with .
The cursor moves to
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP»ON SAVE
2. Confirm with .
The display shown in the figure will appear.
DAY TIME Tset
ON »SU 08:15 75ÉC P
OFF SU 12:45
ON MO 00:00 65ÉC P
OFF MO 23:59
ON TU 00:00 65ÉC P
OFF TU 23:59
3. If you wish, you can use
and change more switch-on times
program: setting the switch-on time")
off times (11.6.2 "Week program: setting the
switch-off time").
4. After changing all desired switch-on and switch off
times, you can start running the week program:
Scroll with to START OPERATION.
Confirm with .

11.7 Adding times to a week program

Call up the menu to INSERT switch-on and switch-off
times into a week program as follows:
1. : WEEK PROGRAM | PROGRAM OVERVIEW.
Confirm with .
WEEK PROGRAM
START OPERATION
^»PROGRAM OVERVIEW
È
SAVE.
to scroll to another day,
(11.6.1 "Week
and switch-
59