Extra Period; Deleting Times From A Week Program - A.O. Smith SGS - 100 Installation & Service Manual

gis

11.9 Deleting times from a week program

All switch-on/off times are shown sequentially in the
display. Assume that the switch-on/off times for the
appliance are programmed as in the figure.
DAY TIME Tset
ON »SU 08:15 75ÉC P
OFF SU 12:45
ON SU 18:00 75ÉC P
OFF SU 22:00
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
To delete a period, proceed as follows:
1. : WEEK PROGRAM | PROGRAM OVERVIEW.
Confirm with .
MENU
OFF
^»ON
È WEEK PROGRAM
2. Scroll with to PROGRAM OVERVIEW.
Confirm with .
WEEK PROGRAM
START OPERATION
^»PROGRAM OVERVIEW
È
The display shows the menu for the week
program.
3. Scroll with to DELETE.
Confirm with .
To warn you that you are now working in the delete
sub-menu, the cursor is replaced with an
exclamation mark (!) and the period settings flash.
DAY TIME Tset
ON !SU 08:15 75ÉC P
OFF SU 12:45
ON SU 18:00 75ÉC P
OFF SU 22:00
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
4. Scroll with to the day to be deleted. For
example, SU (Sunday) in the second period. See
the figure.
Instruction manual SGS
Confirm with .
DAY TIME Tset
ON !SU 18:00 75ÉC P
OFF SU 22:00
ON MO 00:00 65ÉC P
OFF MO 23:59
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
5. The lines showing switch-on/off times are replaced
by the text DELETE BLOCK?. See the figure.
Confirm with .
(or use to cancel)
DAY TIME Tset
ON ! DELETE
OFF BLOCK?
ON MO 00:00 65ÉC P
The switching period has been deleted. You will return
now to the week program menu. The cursor points to
the first programmed period.
DAY TIME Tset
ON »SU 08:15 75ÉC P
OFF SU 12:45
ON MO 00:00 65ÉC P
OFF MO 23:59
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
6. Scroll with to START OPERATION.
Confirm with .
The week program is active.

11.10 Extra period

Use an extra period when you either want to have the
appliance switch on and off for a certain period, either
without modifying the active week program, or without
taking the appliance out of the OFF mode (frost
protection active).
If the appliance is running under an "extra period",
then this is indicated in the display with the text
EXTRA.
EXTRA
10:00 Monday 76ÉC
MO 11:15 Tset 75ÉC
PERIOD ACTIVATED
67