Deleting Times From A Week Program - A.O. Smith BFC Cyclone Installation, User And Service Manual

4.3.8
0311704_BFC_28-120_III_ENEN_V2.4, 2022-10-17

Deleting times from a week program

All switch-on/off times are shown sequentially in the display. Assume that the switch-
on/off times for the water heater are programmed as in the figure.
To delete a period, proceed as follows:
[ ]: WEEK PROGRAM | PROGRAM OVERVIEW.
1.
Confirm with [ENTER].
2.
Scroll with [ ] to PROGRAM OVERVIEW.
Confirm with [ENTER].
The display shows the menu for the week program.
3.
Scroll with [ ] to DELETE.
Confirm with [ENTER].
To warn you that you are now working in the delete sub-menu, the cursor is replaced
with an exclamation mark (!) and the period settings will blink.
4.
Scroll with [ ] to the day to be deleted. For example, SU (Sunday) in the second
period. See the figure.
Confirm with [ENTER].
35