gis
13
13.1 Introduction
Instruction manual BFC
Troubleshooting
A distinction is made between:
•
General errors
General errors are not reported on the display. General errors are:
-
Gas smell
-
Display does not light up
-
Insufficient or no hot water.
-
Water leakage
-
Explosive ignition.
The manual includes a table with general errors
table for general
errors").
•
Displayed errors
Errors are reported on the display, as follows:
-
Line one: an error code and a brief description. The code consists of a
letter and two digits.
-
Lines two, three and four: a long description, alternating with a
recommended action. See the figures. The first shows a possible
error, the second shows the appropriate checking action.
S02: SENSOR ERROR
TOP TANK
SENSOR 1
NOT CONNECTED
S02: SEMSOR ERROR
CHECK TOP TANK
SENSOR
There are various types of errors, all falling into one of two groups:
-
LOCK OUT ERRORS
When the cause has been removed, these errors require a reset with
the
button, before the appliance can resume operation.
-
BLOCKING ERRORS
These errors disappear automatically once the cause of the error has
been removed, after which the appliance resumes operation by itself.
The manual includes a table of error messages that can
appear
(13.3 "Displayed
(13.2 "Troubleshooting
errors").
67