Ec Weight Calibration - Excell ELW Plus User Manual

EXCELL PRECISION CO., LTD.

2-2 02 EC Weight Calibration

Press
TARE
When the digit on the right
flashes, ensure that the weigh
pan is empty. Then Press the
TARE key
After stabilization
Place the displayed weight on
the weigh pan. Press the
TARE key. The scale
calculates the full capacity
internal value and after
stabilization, the buzzer beeps
3 times. Remove the weight
from the weigh pan and the
procedure
is completed
 Unavailable for approval models can't enter weight value mode by
 Weight calibration conditions:
The calibration weight value placed on the weight pan must be over 100e, and must be
within the 90% and 110% of the full weight
020261XX/020264XX/020268XX
020311XX/020314XX/020318XX
key
kg
.
kg
kg
.
The LCD displays the calibration weight value
(the maximum capacity of 1
The digit on the right side keeps flashing.
The scale is calculating the internal value of
the zero point. After stabilization, the LCD
shows the calibration weight value.
st
unit) and the unit.
ZSMT300000351