Excell ELW Plus User Manual page 7

EXCELL PRECISION CO., LTD.
Icon Introduction
STABLE : The weight is stable.
GROSS
: The scale is in the gross mode. The display shows the goods and any
container weight. This Gross status indication is on when the TARE
function is used.
: The unit weight is not sufficient. When the icon is on, the counting
Pcs
function is operational but the count may contain errors.
.
: The sampling size is not sufficient When the icon is on, the counting
. .
. . .
. . . .
function is operational but the count may contain errors.
RANGE 1 : Only available for multi-range models
RANGE 2 : Only available for multi-range models
Keyboard Function
OFF KEY
When the scale is switched on, press the OFF key, the scale will switch off.
ON/ZERO KEY
This key possesses two functions: Power On and Zero function.
 When the weigh pan is empty (free of load) and the display is not showing zero, press the
ON/ZERO key to zero the scale. At zero, the "0" indication is on.
UNITS KEY
Press the UNITS key to switch weight units; the icons will indicate the active units.
 After power off, the scale will memorize the active units. When the scale is powered on again,
it displays the previously active units.
TARE KEY
The tare function will not operate during the following conditions:
1. When the scale powers on if the weight is negative and after a container is placed on the
weigh pan if the weight is still below zero.
2. The tare value is over the full scale capacity.
 Put a container on the weigh pan and after the weight is stable, press the
to zero the weight of the container. The screen displays the "Net" icon.
 Put the goods in the container, the screen displays the net weight value of the goods.
 Remove the full container; the screen displays the negative weight value of the
container. At this time pressing the TARE key again will cancel the tare and the scale
reverts back to zero. The "Net" icon is switched off.
 The tare function can be operated continually to the full weighing capacity of the scale.
 Continual tare operation is adding or removing tare objects on weigh pan and pressing the
TARE key each time.
NET/GROSS KEY
In the Tare mode, the screen displays the "Net" icon, press the
020261XX/020264XX/020268XX
020311XX/020314XX/020318XX
TARE key
NET/GROSS key to
ZSMT300000351