EXCELL PRECISION CO., LTD. Thank for your purchasing of our EXCELL Weighing Scale. To guide you to use our product correctly, please read this Manual carefully to extend the life of machine and to avoid error. Instruction for Use 1) Please keep the scale in a cool dry place. Do not store it at high temperature.
Page 5
EXCELL PRECISION CO., LTD. Due to the storage battery adopt the advanced free-maintaining technique, customers need not to replenish electrolyte. The scale should be recharged every 3 months to prevent failure of the internal rechargeable battery. 1. The battery should be charged for 8~10 hours.
EXCELL PRECISION CO., LTD. Chapter 1 Introduction 1-1 Features Sealed waterproof silica gel strip blocks water from infiltrating into the scale. Surrounded by waterproof grade sheeting to ensure the water free. 1/3,000~1/6,000 display resolution available. Aluminum frames coated with anti-corrosion treatment for longer lifespan.
EXCELL PRECISION CO., LTD. 1-3 Power Supply Power Supply Selection DC 6V / 4Ah rechargeable battery AC 110V~240V (±10%) adapter Power Consumption 25 mA (system + L/C + front display;Power saving mode) 35 mA (system + L/C + front and back display;Power saving mode)
EXCELL PRECISION CO., LTD. UNITS: switching units Press the UNITS key to switch weight units, the icons or arrows will indicate the active units as appropriate. The units available are dependent on the exact scale model. After power off, the scale will memorize the active units. When the scale is powered on again, it displays the previously active units.
EXCELL PRECISION CO., LTD. INTERNAL VALUE MODE (must hook up Load Cell to test) Press to enter, and the display shows internal value TARE Please check whether the internal value has changed obviously with weight changing. Please check the backlight.
EXCELL PRECISION CO., LTD. Chapter 2 External Function Setting In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to enter the External Function setting mode. The LCD shows Press UNITS key Press ON/ZERO key Press UNITS key...
EXCELL PRECISION CO., LTD. 2-1 General Function Setting There are 7 functions in the general function setting mode from Workflow of the General Function setting: DISPLAY NOTE ACTIONS ON/ZERO key ⇒ Upward key (from 0 to 9) UNITS key ⇒ Downward key (from 9 to 0) Press TARE key TARE key ⇒...
EXCELL PRECISION CO., LTD. 2-1-1 Power Saving Function Setting Select in the General Function setting mode to change power saving function setting. DISPLAY NOTE ACTIONS Press TARE key The displays shows the last status Default setting = off Use ON/ZERO or UNITS key to select function “on”...
EXCELL PRECISION CO., LTD. 2-1-2 Automatic Power-off Timer Setting Select in the General Function setting mode to change the automatic power-off timer setting. DISPLAY NOTE ACTIONS Press TARE key LED displays the last status Use ON/ZERO or UNITS Automatic power-off timer setting...
EXCELL PRECISION CO., LTD. 2-1-3 Hi/Lo/OK Function Setting Select in the General Function setting mode to set the Hi/Lo/OK function. This function is available in all unit modes. In one specific unit mode, enter to set the Hi/Lo/OK values. NOTE...
EXCELL PRECISION CO., LTD. 2-1-4 Restore to the Default Setting Select in the General Function setting mode to restore to the default setting. DISPLAY NOTE ACTIONS Press TARE key ⇒ Return (Cancel the Use ON/ZERO or UNITS restoration) keys to select “return” or “format”...
EXCELL PRECISION CO., LTD. 2-1-5 Noise Filter Setting Select in the General Function setting mode to set the noise filter setting. NOTE ACTIONS DISPLAY Returning to zero point setting LED displays the last status Returning to the zero point setting...
EXCELL PRECISION CO., LTD. 2-2 Weight Calibration In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to enter the External Function setting mode. The LED shows and uses the NET/GROSS or UNITS key to select to enter the weight calibration mode.