Table of Contents
Advertisement
@ Changing the Volume
@ Asigning Registration Memory Channel
When an SR Series organ is transmitting, there are two
Number
methods
for changing the volume
of the receiving
instruments attached to the channels for which the
1) Deactivate
all four switches:
SOLO.
UPPER
LEDs in the SOLO, UPPER, LOWER, and PEDAL
m
LOWER, and PEDAL.
'
:
switches are lit:
(2) Press the FUNCTION switch twice to display the
(1) Use the expression pedal to simultaneously adjust
current MIDI channel assignment.
the volume
of both the electric organ
and the
instruments.
(2) Activate the MODE
switch and adjust the TOTAL
VOLUME
without
changing
the volume
of the
organ.
MIDI channel
Fe
{3) Use the arrow switches to change the assignment.
(4) Press the FUNCTION switch a third time to register
the change.
Note:
Both methods assume, of course, that the receiving
:
sage
:
® Results
instrument's implementation supports the MIDI voi-
:
oF
:
ume change and expression pedal messages. Check
When the organ is receiving on a channel on which
the owner's
manual
for the instrument.
another
Instrument
IS transmitting,
a tone
change at
When an SR Series organ is receiving, it reacts to all
the transmitting instrument produces the registration
messages on the channels for which the LEDs in the
memory change for the organ.
SOLO, UPPER, LOWER, and PEDAL switches are lit.
PROGRAM
NO.
REGISTRATION
BUTTON
SR5
PROGRAM
PROGRAM
PRESET
OOnDARWN
—
1
2
3
A
5
1
2
3
4
All Button OFF
Ignored
1
2
3
4
5
6
7
1
2
3
4
5
6
Ignored
7
Ignored
All Button Off
Ignored
16 or higher
Ignored
Ignored
54
Advertisement
Table of Contents
