Table of Contents
Advertisement
M@SRS5
(1)
Press the SYNTHESIZER switch in the KEYBOARD
CONDUCTOR section.
(2) Select a tone from the SYNTHESIZER control block.
Pressing a tone switch automatically cancels the
current one.
SYNTHESIZER
—
:
=
PORTA — These smooth the transitions (continuous
Glide) between notes for legato playing. Pressing PORTA
I, PORTA II, or both simultaneously (PORTA IJ) provides
three successively faster transitions.
TOUCH — This allows you to control tone, volume and
effect by varying the key force, speed, and pressure you
apply to the keyboard.
T. VIB. {Touch Vibrato) — This adds vibrato to the
keyboard output. The amount and speed depend on the
pressure applied to the key.
VARI. Land VARI. II — These add variations of sound
to the synthesizer output. They may also be used in
combination.
(4} Adjust the volume as necessary.
23
®@ Synthesizer Tuning (SR5)
The SR Series allows you to adjust the pitch of the
synthesizer relative to the other tones in increments of
1.5 cents up to a maximum of 45 cents on either side.
Vsvevtue.
os
(1) Press the SYNTHE switch in the TUNE section to
change the multifunction display to the one shown
below.
W syumte
;
(2) Use the arrow switches in the RHYTHM section to
adjust the relative pitch.
qe
Ny
Note:
The display gives the relative pitch in units of 1.5 cents
over the range O—30 on either side.
(3) Press the SYNTHE switch in the TUNE section a
second time to return the multifunction display to
the original contents.
Advertisement
Table of Contents
