Table of Contents
Advertisement
(2} Select a tone from the ORCHESTRA section of the
@ TIMPAN}
PEDAL
control block. Only the last one pressed
takes effect.
® Procedure
{1} Press either the TIMPANE I or TIMPANI II switch so
that the LED in the upper right hand corner starts
flashing.
Notes:
¢ Pressing one TIMPANI switch automatically cancels
the other.
e Unlike other tone switches, it is also possible to turn
both off without
using the PEDAL
ORCHESTRA
switches in the KEYBOARD CONDUCTOR section.
*When the LED is flashing, FILL INs and ENDING (p.26)
{3) (OPTIONAL)
Add
effects from
the ORCHESTRA
are not available.
Y
F
ORCHESTRA
effect control block.
% TIMP
ORCHESTRA
(2) Press the right foot switch to light the LED and add
the timpani to the PEDAL keyboard output.
—~\be
ee Prirvean
Privean
I
SUSTAIN
— This adds extra resonance (prolongs
fest
nae
sound) to the PEDAL ORCHESTRA output. Pressing SUS
I, SUS JJ, or both simultaneously (SUS III} provides
(3) Press the foot switch a second time to return the
three successively longer resonances. It does not affect
TIMPANI function to the standby mode.
TIMPANI I and I.
(4) To change from TIMPANI I to TIMPANI II or back
VARI (SR7 only) — This adds variations to the OR-
again, simply press the corresponding switch. The
CHESTRA
output.
However,
it does
not effect the
change takes effect immediately no matter whether
TIMPANI.
the TIMPANI function is active or just on standby.
TOUCH (SR7 only) — This allows you to control tone
(5) To cancel the TIMPANI function, press the switch
and volume by varying the key force you apply on the
with the flashing or lit LED. The right foot switch
keyboard.
then reverts to it normal FILL IN function. These
changes take effect immediately no matter whether
(4) Adjust the volume as necessary.
the TIMPANI function is active or just on standby.
17
Advertisement
Table of Contents
