Table of Contents
Advertisement
(10)
Release the WRITE key to start the WRITE opera-
tion. The process takes only a few seconds.
Note:
The message OK appears on the display when the
operation is complete.
PROGRAM
(11)
If the message OK does not appear, go back to step
9.
Note:
The organ will not allow you to store a FILL-IN, INTRO,
or ENDING pattern as PROGRAM
I or PROGRAM
II.
Neither will it let you store patterns for these two
areas
in the areas
designated
for these
rhythm
variants.
@ Exchanging the Data of PROGRAM I and II
(12)
Press the rhythm selector and VARIATION, FILL-IN
and/or INTRO/ENDING switches which LEDs are
lighting so that they all will go out.
(13)
Simultaneously press the MOVE and WRITE keys
on the lower keyboard.
@ Quitting
Note:
This command
is available at al! times during the
editing sesson.
—
FILt IN SELECT ———
Cols Se
iNTRO/
D
I
ENDING
H.. Advanced Procedures
@ Editing INTROs and ENDINGs
Repeat steps 1-3 of the basic pattern (p.29)}.
(1) Specify
INTRO
or ENDING:
Press
the
INTRO/
ENDING switch once for INTRO, twice for ENDING,
or a total of three times to cancel.
Note:
The lower left hand corner of the display indicates the
three possible states with an [, E, and blank, respectively.
| INTRO/ |
ENOING
T
PROGRAM
j
J-
dvd
INTROS
ENDING
y
Y
INTRO/
ENDING
ie)
N
(2) Press the RHYTHM switch and edit with the basic
procedure.
(~]
RHYTHM
(3) To store the results, hold down the key labelled
WRITE {the first C on the lower keyboard}, press the
switches for the appropriate storage area, and then
release the WRITE key.
Note:
The WRITE operation automatically clears the INTRO/
ENDING switch setting.
Advertisement
Table of Contents
