Table of Contents
Advertisement
Notes
(1) When
the two-digit display reaches bar 99, it
displays bar 100 as OO.
(2) It is important to remember that the sequencer
stores only the registration numbers and not the
actual registrations. If you subsequently alter the
stored registrations, the sequence
may not be
exactly what you intended. On the other hand,
however, if you discover that you have made an
error in a particular registration used in various
places throughout the sequence or would like to
modify it, you have only to change it once. It is not
necessary to alter the sequence.
® Storing Both Registrations and Chords
Storing registrations and chords together in the same
sequence
is a simple matter of pressing both the
CHORD
and REGIST switches and the appropriate
chords and registration numbers for each beat. The
sequencer
will, however,
give precedence
to the
rhythm
and automatic accompaniment settings of the
latter.
® Filling an Entire Bar
If the chord or registration remains constant for the
entire bar, there is a shortcut available: Instead of
pressing the right arrow switch to advance to the next
beat, hold the right arrow switch down and press the
left arrow switch. The organ automatically stores the
chord, registration, or both for all remaining beats in
the bar.
Elba
® Correcting Mistakes
If you should discover that you have made a mistake,
use the left arrow switch to return to that bar and that
beat, press the correct chord, registration, or both, and
then press the right arrow switch to store the new
settings.
43
7.3 Playing Stored Sequences
(1) Use the CHORD
and REGIST switches to specify
what you wish to play back: chords, registrations, or
both.
REST
(2) Press the PLAY switch and, if you wish the se-
quence to repeat, the REPEAT switch.
i
reoist
Notes:
¢ lf there is no recorded sequence, the PLAY switch
cannot be turned on.
¢ As it plays back the sequence, the program se-
quencer gives the bar and beat numbers on the
multifunction display.
¢ You may turn the REPEAT switch on and off during
the playback.
(3) Press the PLAY switch a second time to introduce a
pause in the playback.
P| as
—
—
Notes:
* The LED in the switch flashes to indicate that the
sequencer's playback function is activated, but on
standby.
* You may adjust the bar count with the arrow keys.
Advertisement
Table of Contents
