Maintenance - Husqvarna V554X Operator's Manual

2. Make a small turn (A) in the direction of the uncut
area of grass.
C
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
Maintenance schedule
* = The instructions are not given in this operator's
manual.

Maintenance

Make sure that there are no
damage on the product.
Do a check for damages on
the cutting deck.
Make sure that there are no
loose or missing parts.
Make sure that there are no
fuel or oil leaks from the
product.
Do a check of the tire pres-
sures.
Do a check of the engine oil
level.
Do a check of the hydraulic
oil level.
2375 - 003 - 13.03.2024
B
A
Maintenance
Before you do any
Daily mainte-
nance
Before After
*
*
*
*
X
O
X
3. Pull the 2 control levers to the reverse position
and move the product rearward (B).
4. Push the control levers forward. To make a small
turn (C), pull harder on the control lever that is in
the direction of the row you have cut before.
5. Push the 2 control levers forward to cut the next
row.
X = The instructions are given in this operator's
manual.
O = Refer to the engine manual for instructions.
Maintenance schedule for the operator
Do mainte-
Maintenance interval in hours
nance at a
minimum of
1 time each
50
year
100 200 250 300 500
15