Husqvarna V554X Operator's Manual page 28

Problem
The engine apparently has no power.
There is vibration in the product.
The engine becomes too hot.
The battery does not charge.
The product moves slowly, with irregular
speed or not at all.
The drive of the blades do not engage.
The transaxle leaks oil.
28
Cause
The fuel filter is clogged.
Incorrect neutral adjustment. Refer to
tion on page 20 .
The spark plug is damaged.
The carburetor is incorrectly set.
The blades, the pulley or other rotating parts are loose. Refer to
To replace the blades on page 21 .
One or more of the blades are not balanced. Refer to
ine the blades on page 21 .
The engine is loose.
The air filter is clogged.
There is overload in the engine.
The airflow around the engine is not sufficient.
The engine speed regulator is damaged.
The oil level is too low.
There is dirt in the fuel line.
The spark plug is damaged.
The connection at the cable connectors on the battery terminals
To remove and install the battery on page 19 .
is bad. Refer to
The charging cable is disconnected.
The charging system is damaged.
The parking brake is engaged.
The drive system is disengaged.
The drive belt on the transmission is loose or damaged.
There is air in the hydraulic system.
The drive belt on the mower deck is loose.
The electromagnetic coupling contact is loose.
A fuse is blown.
The seals, housing or gaskets are damaged.
There is air in the hydraulic system.
To adjust the neutral posi-
To exam-
2375 - 003 - 13.03.2024