Husqvarna V554X Operator's Manual page 25

6. Turn the oil cap (A) counterclockwise and
remove it.
A
7. Turn the oil filter counterclockwise and remove it.
8. Lightly lubricate the rubber seal on the new oil
filter with oil.
9. Turn the oil filter clockwise by hand until the
rubber seal is in position, then tighten a half turn
more.
10. Install the oil drain plug.
11. Fill the hydraulic oil tank with new oil. Refer to
Technical data on page 31 .
12. Install the oil cap (A).
13. Do a check of the hydraulic oil level. Refer to
do a check of the transmission oil level on page
23 .
2375 - 003 - 13.03.2024
To
25