Date/Time Stamp Not Appearing On Images; Pir Sensor Led Flashes/Doesn't Flash; Camera Won't Retain Settings - Camouflage EZ2 Elite Manual

8.TROUBLESHOOTING / FAQ

8.6.Date/Time Stamp not appearing on images.

Make sure that the Time Stamp parameter is set to 'On'.

8.7.PIR Sensor LED Flashes/Doesn't Flash

1.When the camera is in TEST mode, a special LED on the front of the camera will
flash when it senses motion. This is for setup purposes only and will help the user aim
the camera.
2. During use, the LED will not flash when the camera takes an image. This is to help
keep the camera hidden from everything.

8.8.Camera won't retain settings

Make sure that you have been saving the changes to any parameter settings that you
made while in Setup mode, by pressing OK after changing the setting.
Moisture or Ants inside Camera
1.To ensure humidity or rain is kept out of the camera, secure the DC In plug firmly in
place.
2. Ants can be attracted by low level electronic vibrations, and enter through any gaps
between the exterior and interior of the camera. Make sure the DC In plug is securely
attached.
19