Camera Operation; Mode Switch; Mode Change Setting In Test Mode - Camouflage EZ2 Elite Manual

5.CAMERA OPERATION

5.1.Mode Switch

There are three basic operational modes:
OFF mode: Power switch in the OFF position.
ON mode: Power switch in the ON position (LCD screen is off.).
TEST mode: Power switch at TEST position (LCD screen is on).
OFF Mode
The OFF mode is the "safe" mode when any actions must be taken, e.g. replacing the SD
card or batteries, or transporting the device.
ON Mode
The camera will take photos or videos automatically (according to its current parameter
settings) when it is triggered by the PIR sensor's detection of Activity in the area it covers.
TEST Mode
In the TEST mode you cm check and change the settings of the camera with the help of
its built-in LCD. These settings, found in the TEST Menu, let you change the photo or video
resolution, interval between photos, switch the time imprint on, etc.

5.2.Mode Change Setting in TEST Mode

The main purpose of the TEST mode is to allow you to change the settings of the
camera's parameters so your trail camera operates exactly the way you want it to.
06