Beep Sound; Format Memory Card; Serial No; Reset Setting - Camouflage EZ2 Elite Manual

5.CAMERA OPERATION
camera from unwanted access, You can set a 4-digit combination. Once the code is
set, the camera will prompt you to enter the correct code.

5.20.Beep Sound

On(Preset)/Off
Set Off to tum off beep sound and starting/goodbye sound.

5.21.Format memory card

Deletes (erases) all files stored on a card to prepare it for reuse. Always format a card
that has been previously used in other devices.
Caution! Make sure you have downloaded and backed up any files
you want to preserve first!
Press OK to execute, press MENU to exit without formatting.

5.22.Serial NO

Select On if you want to use a serial number to rank the camera. You can set 2 & 4 digit
combinations. This helps multi-camera users identify the location when reviewing the
photos, since each camera will imprint its number on all photos it captures.

5.23.Reset setting

Select Yes and press OK to restore all parameters to the original factory default
settings.

5.24.Aligning the camera

In test mode you can work out the optimum exposure angle and the range of the
motion sensors.
11