Using The Record Timer.29 - Panasonic SC-AK27 Operating Instructions Manual

Using the timer
Using the record timer
Select this timer when you want to use the timer to record a midnight
program or while you are out.
Preparations
• Make sure that you have completed "Setting the time" on page 11.
• Switch on the power.
The figure shows how to set the record timer for recording FM
broadcasts from 6:30 p.m. to 8:00 p.m.
Q Press [CLOCK/TIMER] to select "0REC".
Every time you press the button:
CLOCK — ©PLAY — 0REC
t— Previous display —I
B
"ON" time setting
(Within 8 seconds or so)
© Press [V] or [A] to select the starting time.
@ Press [CLOCK/TIMER].
B
"OFF" time setting
© Press [V] or [A] to select the ending time.
®
Press [CLOCK/TIMER].
□
Source selection
Select the desired source and then prepare for
recording.
To record from the radio
Press [TUNER] to select the band and tune in the desired
station.
To record from a unit connected to the "AUX" terminals
Press [AUX].
Prepare for recording.
© Insert a tape into deck 2 with the side on which the recording
will start facing you.
(2) Select the reverse mode.
turn
Reverse mode does not become part of the timer memory.
Press [0PLAY/0REC] to select "0REC".
Every time you press the button:
©PLAY — ©REC
t— (OFF) 1
[0 PLAY/0 REC] indicator lights up.
UT
Press [O/l] to put the unit on standby at least 2
minutes before your timer starting time.
About 30 seconds before the set time, the recording will start
with all sound muted automatically.