Varying The Sound Quality With The Manual Equalizer.27 - Panasonic SC-AK27 Operating Instructions Manual

Varying the sound quality with the
manual equalizer
_
Dial [SOUND EQ] to display "MANUAL".
When it is turned clockwise, the settings are selected in the
following sequence.
©HEAVY -
© CLEAR
©SOFT
© DISCO
© LIVE
© HALL
® MANUAL
® Al EQ
® FLAT -
The SOUND EQ lamp lights more brightly, and "FLAT is cleared.
Operate [SOUND EQ] jogcap and set the sound
quality as desired.
© <-> direction: For selecting the range of the sound to
be adjusted
Characteristics of each sound range
Under 100 Hz: Super woofer range
Around 330 Hz: Bass to midrange
Around 1 kHz: Midrange
Around 3.3 kHz: Midrange to treble
Above 10 kHz: Treble
©it direction: For adjusting the level (7 steps)
When the level is in the center, the dot flashes rapidly.
Repeat steps © and © to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display "FLAT".
Notes
• The sound quality setting is stored automatically. It is recalled
when "MANUAL" is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
27