Yamaha RX-V10MKII Owner's Manual page 39

Adjustment of DELAY TIME
You can adjust the time difference between the beginning of the
sound from the main speakers and the beginning of the effect
sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs individually.
PRO LOGIC : from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
PRO LOGIC : from 15 to 30 milliseconds
ENHANCED (Preset value: 20 milliseconds)
CONCERT VIDEO : from 1 to 100 milliseconds
(Preset value: 28 milliseconds)
MONO MOVIE : from 1 to 100 milliseconds
(Preset value: 20 milliseconds)
ROCK CONCERT : from 1 to 100 milliseconds
(Preset value: 17 milliseconds)
CONCERT HALL : from 1 to 100 milliseconds
(Preset value: 30 milliseconds)
Note
The values of the delay time, center level, rear level and
subwoofer output level you set the last time will remain
memorized even when this unit is in the standby mode.
However, if the power cord is disconnected for more than one
week, these values will be automatically changed to the factory
default settings.
1
Press the DELAY/CENTER/REAR/SWFR key repeatedly
until "DELAY" appears in the display.
DELAY/CENTER
/REAR/SWFR
2
By continuously pressing the "+" or "–" side of the LEVEL
button, the value changes continuously.
The value stops changing momentarily at the preset point.
– +
LEVEL
Notes
When the LEVEL button is pressed, sound is momentarily
interrupted.
Adding too much delay will cause an unnatural effect with
some sources.
m
S
CONCERT
HALL
m S
Adjustable
39