Yamaha RX-V10MKII Owner's Manual page 23

NATURAL SOUND AV RECEIVER RX–V10MK
STANDBY/ON
PHONES SPEAKERS RDS MODE / FREQ EON A / B
ON OFF
PTY SEEK FM
MODE START
9
Adjust the BALANCE control so that the effect sound
output level of the left main speaker and the right main
speaker are the same.
10
Adjust the sound output levels of the center speaker
and the rear speakers by using the LEVEL key so
that they become almost the same as the main
speakers.
–
When the test tone is output from the center speaker,
pressing the LEVEL key changes the output level of
the center speaker.
When the test tone is output from the rear speakers,
pressing the LEVEL key changes the output level of
the rear speakers.
*
Pressing the + side raises and the – side lowers the
level.
INPUT VOLUME
DVD-LD/VCR/V-AUX/TAPE•MD/CD/TUNER/PHONO
6CH/2CH
PTY SELECTOR 0 I0
PRESET STATIONS
TUNING
/ C / D / E KEY MODE BASS TREBLE BALANCE
0 0
EDIT
TUNING CENTER
AM MODE MEMORY MODE PROGRAM
/
– + – +
L R
AUTO / MAN'L MONO MAN'L / AUTO FM
CINEMA DSP
9
BALANCE
L R
+
LEVEL
WIDE TEST
Adjustable
WIDE TEST
Adjustable
DELAY/CENTER
10
– +
/REAR/SWFR
LEVEL
PROGRAM
V-AUX
DIR A DIR B REC/PAUSE
– +
PRESET
DISC
POWER /I
SLEEP
11
Cancel the test tone.
TEST
Notes
Once you have completed these adjustments, you can
adjust the sound level on your audio system by using the
VOLUME control (or the VOLUME keys on the remote
controller) only.
If you use external power amplifiers, you may also use their
volume controls to obtain proper balance.
In step 6, if the center channel mode is in the "PHANTOM"
position, the sound output level of the center speaker
cannot be adjusted. This is because in this mode, the
center sound is automatically output from the left and right
main speakers.
TEST EFFECT
ON/OFF
PROLOGIC ENHANCED
DVD/LD
VCR 2CH/6CH
11
PLAY
TAPE
A/B
A/B/C/D/E TUNER
PLAY
CD
PHONO
VOLUME
TEST
Stops flashing
and disappears
23