Yamaha RX-V10MKII Owner's Manual page 11

Connecting with 6 channel discrete outputs of a Dolby Digital decoder, DTS decoder or DVD player,
etc.
If you have a Dolby Digital decoder, DTS decoder or a DVD player etc. which incorporates a Dolby Digital decoder, DTS decoder or
MPEG 2 decoder, its 6 channel discrete outputs can be connected to the DVD/LD 6CH DISCRT INPUT terminals of this unit.
An example of connections:
3
IN
TAPE
FM
/MD
ANT
75
4
UNBAL .
OUT
GND GND
V-AUX
AM
ANT
IN
VCR
OUT
DVD
/LD
PHONO
AUDIO SIGNAL
AUDIO
OUT
LD player with DOLBY DIGITAL
RF output
Notes
•
The LD or DVD player must be also connected to the
DVD/LD AUDIO SIGNAL input terminals of this unit for
playing a source with Dolby Pro Logic Surround decoded or
in 2-channel stereo (or monaural).
•
The discrete signals input to this unit cannot be recorded by
a tape deck, MD recorder or VCR. To record a source played
on the LD or DVD player, it must be connected to the
DVD/LD AUDIO/VIDEO SIGNAL input terminals of this unit.
1
CD
OUT
MONITOR
OUT
SUB
VIDEO WOOFER
SUB
WOOFER CENTER
IN
VCR
OUT
DVD
/LD
MAIN SURROUND
VIDEO DVD/LD
SIGNAL 6CH DISCRT INPUT
VIDEO
DOLBY
OUT
DIGITAL
RF OUT
DOLBY
DIGITAL
RF
Demodulator
DIGITAL
DIGITAL
OUT
RF IN
•
If you made no connection to the SUBWOOFER input
terminal of this unit or you will not use a subwoofer, you must
make a setting on the Dolby Digital decoder etc. so that
signals at the SUBWOOFER channel are distributed to the
right and left MAIN output terminals of the Dolby Digital
decoder etc.
For details, refer to the owner's manual for the Dolby Digital
decoder etc.
OUTPUT
MAIN CENTER SURROUND
SUBWOOFER
IN
Dolby Digital decoder
11