What's In The Box; Reset Button; Reset Modes; Mxa920 Control Software - Shure MXA920 Manual

Ceiling array microphone
Hide thumbs Also See for MXA920:
Table of Contents

Advertisement

What's in the Box

Square or round array microphone
Square or round hardware kit
Square:
Cable ties (8)
Strain relief tabs (3)
Rubber pad set
Round:
Cable ties (8)
Strain relief tabs (3)

Reset Button

The reset button is behind the grille. To push it, use a paper clip or other tool.
Button locations:
Square array microphones: Behind the grille hole with a silkscreened circle around it.
Round array microphones: Behind the first grille hole to the right of the mute status LED.

Reset Modes

Network reset (press for 4-8 seconds): Resets all Shure control and audio network IP settings to factory defaults. Red
LED along bar.
Full factory reset (press for more than 8 seconds): Resets all network and configuration settings to the factory defaults.
Multicolor flash, then blue LED along bar.
MXA920-S or MXA920-R
Square: 90A49117
Round: 90A49116
Shure Incorporated
9/44

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxa920w-sMxa920w-s-60cmMxa920al-rMxa920b-rMxa920w-r

Table of Contents