When mute sync is working correctly, you can mute a device (mute button or microphone mute button) or the videoconferenc
ing software to mute the room.
To use mute sync:
1.
In Designer, create audio and mute control routes between devices in the room.
2.
Connect a computer with videoconferencing software to the processor's USB port.
3.
Turn on mute sync and logic:
◦
Processors: [Your device] > Settings > Mute control
◦
Microphones without physical mute button: Logic is always on
◦
MXA310 and MXA mute button: Settings > Logic control > Mute control function > Logic out
Designer's auto route process configures all necessary mute sync and logic settings for you.
Compatible Shure Logic Devices
•
P300 (Also mutes
supported soft codecs
•
ANIUSB-MATRIX (Also mutes
•
IntelliMix Room software (Also mutes
•
MXA901
•
MXA902
•
MXA910
•
MXA920
•
MXA710
•
MXA310
•
Network Mute Button
•
ANI22-BLOCK
•
ANI4IN-BLOCK
•
Logic-enabled MX microphones connected to ANI22-BLOCK or ANI4IN-BLOCK
◦
MX392
◦
MX395-LED
◦
MX396
◦
MX405/410/415
For help with specific mute sync implementations,
connected by USB)
supported soft codecs
connected by USB)
supported soft codecs
see our
FAQs.
connected by USB)
Shure Incorporated
27/42