Checkout And Test Procedure; Checkout Procedure; Test Procedure; Using The Test Object - Omron F3S-TGR-CL-K2C Installation And Operation Manual

Body protection sensor safety light curtain

Table of Contents

!WARNING

Once the F3S-TGR-CL system has been configured, mounted, aligned and

properly connected to the machine control system, the initial Checkout Proce-

dure detailed in Appendix A must be performed by qualified personnel. A copy

of the checkout results should be kept with the machine records.

The tests outlined in the Test Procedure in Appendix B must be performed at

installation, according to the employer's regular inspection program and after

any maintenance, tooling change set up, adjustment or modification to the

F3S-TGR-CL system or the guarded machine. Where a guarded machine is

used by multiple operators or shifts, it is suggested that the test procedure is

performed at each shift or operator change. Testing ensures that the light cur-

tain and the machine control system work properly to stop the machine. Fail-

ure to test properly could result in serious injury to personnel.

The test procedure must be performed by qualified personnel.

When using the test object, guide it through the detection zone as shown:

Checkout and Test procedure

Start

End

SECTION 12

Table of Contents

F3s-tgr-cl-k4c