Automatic Preset Tuning - Yamaha GX-505RDS Owner's Manual

Tuning operation
3–DISC CD CHANGER
1
STANDBY
STANDBY
/ON
TIMER
INPUT
2
BASS
PHONES
POWER
1
1
4
4
7
7
0 TUNER
PRESET
TIME
A
EDIT DISC SKIP
D
DIRECTION
TAPE
REC/ PAUSE
YMERSION
SLEEP
VOLUME
-18
E
1 2 3
DISC DISC DISC
PRESET/TUNING/BAND A/B/C/D/E
/
UP
DOWN
PTY SELECT
R . D . S
FREQ PS/
TREBLE
PTY/RT/CT
REC/ AUTO/
MODE DOLBY NR PAUSE MANUAL MEMORY RANDOM
TIMER TIME ADJ HOUR
3
1
2 3
2 3
5 6
5 6
8 9
2
8
+ I0
PRESET
PROG R.TIME
B C
MODE
E
CD
/
MUSIC
INPUT
2

Automatic preset tuning

You can make use of an automatic preset tuning function. With this
function, the built-in tuner performs automatic tuning. Up to 40
stations [8 stations x 5 groups (A, B, C, D and E)] are stored
automatically.
1
Turn on the power.
2
Press INPUT or
display, or simply press TUNER on the remote control.
3
Press and hold MEMORY for more than 2 seconds.
* The "MEMORY" (6) and "AUTO" (4) indicators flash.
The tuner performs automatic tuning and searches for FM stations
first and then AM stations. Received stations are programmed
sequentially to A1, A2, A3 and so on.
When the automatic preset tuning is completed;
The display shows the frequencies of the first preset station (stored
to A1).
If you want to check the contents and the number of preset stations,
follow the procedure in the section "To recall a preset station" on
page 19.
To recall a preset station
Simply follow the procedure in the section "To recall a preset
station" on page 19.
Notes
• The automatic preset tuning search will be performed through all
frequencies until 40 stations are stored. If the number of received stations
is less than 40, the search will stop after searching all frequencies.
* Since FM stations are searched for first, there may be a case that 40
preset stations are occupied by FM stations only.
• With this function, only stations with sufficient signal strength are stored
automatically. If the station you want to program is weak in signal
strength, tune in to it with the Manual tuning method (in monaural) and
program it by following the procedure in the section "To store stations"
on page 19.
• You can replace a preset station with another FM or AM station
manually by simply following the procedure in the section "To store
stations" on page 19.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the AC supply lead is disconnected from
the AC outlet or the power is cut due to temporary power
failure. If, however, the power is cut for more than one week,
the memory may be erased. If so, it can be re-programmed by
simply following the Preset tuning steps.
until "TUNER" (2, 8) appears on the