Setting The Clock; Adjusting Brightness Of The Display - Yamaha GX-505RDS Owner's Manual

Preparations and connections

Setting the clock

1 2
DISC DISC
3–DISC CD CHANGER
STANDBY
STANDBY
/ON
TIMER
PRESET/TUNING/BAND A/B/C/D/E
INPUT
PTY SELECT
R . D . S
BASS TREBLE
REC/
PHONES
MODE DOLBY NR PAUSE
DIRECTION
AUTO REVERSE CASSETTE DECK DOLBY B NR
DISPLAY
1
FREQ PS/
PTY/RT/CT MODE –
2
MEMORY RANDOM REPEAT
TIME ADJ HOUR MIN
FREQ PS/
PTY/RT/CT MODE –
3
MEMORY RANDOM REPEAT
TIME ADJ
HOUR MIN

Adjusting brightness of the display

DISC CHANGE OPEN/CLOSE
DIGITAL AUDIO
YMERSION B.BOOST
VOLUME
UP
DOWN
FREQ PS/
PTY/RT/CT MODE – PTY SEEK – START
Y RANDOM REPEAT TIME DISPLAY
HOUR MIN
-8
E
3
DISC DISC CHANGE OPEN/CLOSE
DIGITAL AUDIO
YMERSION B.BOOST MUSIC
VOLUME
/
UP
DOWN
FREQ PS/
MODE – PTY SEEK – START
AUTO/ PTY/RT/CT
MANUAL MEMORY RANDOM REPEAT TIME DISPLAY
TIMER TIME ADJ HOUR MIN
OPEN/CLOSE
Changes.
Changes.
MUSIC
VOLUME
DISPLAY
1
While the power is on, press DISPLAY to display time.
2
While holding down TIME ADJ, press HOUR and set the hour.
* Press HOUR once to advance the time by 1 hour. Press and
hold to advance continuously.
3
While holding down TIME ADJ, press MIN and set the minute.
* Press MIN once to advance the time by 1 minute. Press and
hold to advance continuously.
* The hour setting will not advance even if minute is advanced
from "59" to "00".
Note
In the event of a power failure or when the AC supply lead is disconnected,
the time display will go out; however, the clock will function for about 5
minutes without any power supply. Otherwise, the time display will flash
on and off to indicate that time must be reset.
If desired, you can adjust the brightness of the display.
Press and hold DISPLAY for more than 2 seconds so that
"DIMMER ±0" appears on the display.
While holding down DISPLAY, turn VOLUME clockwise to
increase or counterclockwise to decrease brightness.
Control range: ±0 to –6 (Preset value: ±0)